Commit failed

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Commit failed

L2 Linker

Hi everybody,

Device: PA-2050

Firmware: 4.0.1

we are getting this error message when we try a commit.

What is happening when this appears and what can we do?

A rollback to a further config version is not helping.

Error message:

Management server failed to send ID request to client device

Commit failed

On Web-Gui and on CLI!

Reagrds

Christian

15 REPLIES 15

The quickref over at https://live.paloaltonetworks.com/docs/DOC-4254 says:

"

Monitor Management or Device Server

Display management server messages for commit failures, updates, licenses, link status, policy details, etc.

show system resources follow

tail follow yes mp-log ms.log

Display device server message for commit failures, updates, licenses, link status, policy details, etc.

tail follow yes mp-log devsrv.log

"

Unfortently it doesnt tell you the difference between the two, however until someone from PA clears this out you should be able to see some stuff comparing:

tail follow yes mp-log

with

tail follow yes devsrv.log

This post however tells you some details of each process:

https://live.paloaltonetworks.com/message/16345#16345

  • 10961 Views
  • 15 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!