Commit takes too much time than expected

[sib2017]

Hi,

Commit taking very long time than expected , 

Before it was working fine . How can i  find the cause behind it 

Thank you 

[pankaku]

Which Device?

What does this command shows "show management-clients"

Is the management server CPU high? If yes it will take time. One thing you can try is to restart the management server.

debug software restart management-server

debug software restart process management-server ==> for PAN-OS 7.0.1 onwards

Before restarting the management server do a commit otherwise the changes that you have done will be gone. After restarting take the gui and cli access after 2 mins. Check if the commit is happening fastly or not if not then again check the command "show management-clients"

Hope this helps!

[sib2017]

Hi,

Thanks for the reply . Sometimes management cpu goes up to 99%

show managemnt clients 

Client PRI State Progress
-------------------------------------------------------------------------
routed 30 P2-ok 100
ha_agent 25 P2-ok 100
device 20 P2-ok 100
ikemgr 10 P2-ok 100
keymgr 10 init 0 (op cmds only)
logrcvr 10 P2-ok 100
dhcpd 10 P2-ok 100
varrcvr 10 P2-ok 100
l3svc 10 P2-ok 100
sslvpn 10 P2-ok 100
rasmgr 10 P2-ok 100
npagent 10 init 0 (op cmds only)
useridd 10 P2-ok 100
satd 10 P2-ok 100
websrvr 10 P2-ok 100
sslmgr 10 P2-ok 100
authd 10 P2-ok 100
pppoed 10 P2-ok 100
dnsproxyd 10 P2-ok 100
cryptod 10 P2-ok 100
dagger 10 init 0 (op cmds only)

And i have multiple dependancy warning of pocies and qos rule 

Fixing the dependency will solve the issue ?

Thank You

[pankaku]

Dependancy waring will not make any difference. Those will affect the traffic passing through the firewall. If the management CPU is high then the commit will take time

[OtakarKlier]

Hello,

Would you be able to provide us with the model number of the unit and how long the commits are taking vs how long they have/should take?

Regards,