configure management IP address using CLI

[bdapice]

i'm having trouble configuring the IP address on the Management interface on my 3020 using CLI.  can anyone please help?

[pulukas]

CLI:

1. Enter configuration mode:> configure
2. Use the following command to set the IP address of the management interface:
   > set deviceconfig system ip-address <ip address> netmask <netmask> default-gateway <default gateway> dns-setting servers primary <DNS ip address>
3. Commit the changes:
   > commit

Documentation

How to Configure the Management Interface IP

[panos]

Also this guide will help you

https://live.paloaltonetworks.com/docs/DOC-4254

[hshah]

Hi Bdapice,

Please use following commands, I have taken example for IP addresses.

Firewall> configure

Fireall # set deviceconfig system ip-address 1.1.1.1 netmask 255.255.255.0 default-gateway 1.1.1.2

# commit

Regards,

Hardik Shah

[mmmccorkle]

Indeed, the above is correct.

To confirm again:

set deviceconfig system ip-address x.x.x.x netmask x.x.x.x default-gateway x.x.x.x dns-setting servers primary x.x.x.x

The DNS server is not needed at first necessarily, but the MGT port handles the updates for the appliance and must be able to resolve update.paloaltonetworks.com in order to accomplish this.

If you want to setup a DataPlane interface to handle these options instead, like retrieving license keys, then configure a service route found under Device > Setup > Services, if I recall.

Thanks!