Configure Session Timeouts particular source or destination ip in Palo Alto

cancel
Showing results for 
Search instead for 
Did you mean: 

Configure Session Timeouts particular source or destination ip in Palo Alto

L2 Linker

Can we specify session, session timeout i.e. Keepalive timer for particular source or destination ip in Palo Alto?

 

In the WebGUI, we will find these settings at Device > Setup > Session, But  this settings will be applicable for global setting.

 

I found that, we can specify it for the application. 

 

If we can do the same for ip address. Kindly update.

1 ACCEPTED SOLUTION

Accepted Solutions

Cyber Elite
Cyber Elite

Hi @PankajDhobe 

In your security policy rule you can use a service object where you are able to specify the session timeout. As long as you use this object only in this one rule, the longer session timeout only applies to this one connection.

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

Hi @PankajDhobe 

In your security policy rule you can use a service object where you are able to specify the session timeout. As long as you use this object only in this one rule, the longer session timeout only applies to this one connection.

View solution in original post

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!