Critical System Alert

Showing results for 
Search instead for 
Did you mean: 

Critical System Alert

L0 Member

The firewall has flooded the system logs with the following message:

Traffic and logging are resumed since traffic-stop-on-logdb-full feature has been disabled.


Software Version- 8.0.3-h4

Model: PA-3020


Disk space looks fine:


Filesystem            Size  Used Avail Use% Mounted on

/dev/sda2             3.8G  2.7G  897M  76% /

/dev/sda5             7.6G  3.0G  4.2G  42% /opt/pancfg

/dev/sda6             3.8G  2.7G  929M  75% /opt/panrepo

tmpfs                 1.9G  116M  1.8G   7% /dev/shm

/dev/sda8              90G   51G   34G  61% /opt/panlogs



Any suggestions please?


Thanks in Advance.


Best Regards,

Ayesha Shaikh


Cyber Elite
Cyber Elite


@Ayesha_Shaikh wrote:


Software Version- 8.0.3-h4

Model: PA-3020


You are running a software version that is vastly out of date, and honestly from before I would have even recommended 8.0 be put on production equipment. I would look at upgrading to 8.0.14 or 8.0.15. you are running into PAN-80660 which was addressed in 8.0.6


** by out-of-date I simply mean that the version is far from the current release within the 8.0.* line of code; not that the version isn't actually supported. 

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!