09-03-2019 10:24 AM
Hi Everyone,
We already have ssl decryption enabled.
Now need to config decrypt mirror port.
Need to confirm when PA sends raw packets to server will it cause any performance issues on the PA?
Regards
Mike
09-03-2019 11:03 AM
Hello
Documentation from the EDU training classes stated 5%, when Inbound Inspection (vs SSL Forward Proxy) was enabled.
I did not see any specific numbers for SSL Forward proxy, but a reasonable ballpark would be between 5 to 15%.
I have been running decryption and port fwd mode on my 220 and have not noticed any degradation in performance.
Thank you.
09-03-2019 11:03 AM
Hello
Documentation from the EDU training classes stated 5%, when Inbound Inspection (vs SSL Forward Proxy) was enabled.
I did not see any specific numbers for SSL Forward proxy, but a reasonable ballpark would be between 5 to 15%.
I have been running decryption and port fwd mode on my 220 and have not noticed any degradation in performance.
Thank you.
09-04-2019 07:02 PM
Is it software based or hardware based?
09-07-2019 02:14 PM
Thanks for updating on this
09-11-2019 08:40 PM
The PA220 is probably considered software based, as there is software emulation for the dataplance processors.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
