Need to configure destination Nat with Nat Pool Provided by ISP. Below are the ip details :
220.127.116.11/30--Wan IP Pool
18.104.22.168/30--Configure at Palo Alto Interface
22.214.171.124/30--ISP gateway IP
126.96.36.199/29--Lan IP Pool Provided by ISP.
Basically i want to do destination Nat using each IP Address from Usable Lan IP Pool towards my FTP server (located in Lan) .
Will do nat using 188.8.131.52 for certain users coming from outiside to reach FTP Server (10.10.10.1)
Will do nat using ip 184.108.40.206 for certain users coming from outiside to reach FTP Server (10.10.10.1)
Can someone help me to achieve this.
This is a fairly basic NAT configuration which is heavily covered in the admin guide and plenty of knowledgebase articles. I would look at the configuration examples and read into it a bit, and then come back if you run into any issues.
I'm not sure why you would want to use all of these addresses to access a single resource; that seems like a rather odd design decision that really doesn't benefit anything.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!