DHCP not passing thru the 500 in wire mode

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

DHCP not passing thru the 500 in wire mode

Not applicable

I am using a pa-500 as just a web proxy, I have clients sitting in different vlans connected to a ASA5512 that is acting as the router/FW and has DHCP Relay setup and was working fine.  I added the PA500 between the ASA and the other network as a web proxy, since then DHCP has failed to work.  The PA 500 is running in wire mode

CSEC.JPG

Any Suggetions

2 REPLIES 2

L5 Sessionator

Test by creating a security policy and allow application dhcp from any to any and if that works then check the logs and make that security policy more specific.

That worked, Thanks

  • 2885 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!