09-04-2019 05:55 AM
I have a query regarding dhcp relay , I L3 interface on switch where ip helper is configured then there is interconnect between core switch and firewall question is do we need to enabled dhcp relay on palo alto interface connected to core switch
09-04-2019 09:44 AM
What device do you want to actually hand out the addresses? In most situations like what you appear to be describing, the ip helper address configuration will point towards a DHCP server so that it will distribute addresses instead of the switch. In that case, there is no need to configure DHCP Relay on the firewall itself as it's already being handled by your switch and your DHCP server.
09-04-2019 06:07 AM
this depends if you want the firewall to also relay the dhcp, or not
09-04-2019 09:44 AM
What device do you want to actually hand out the addresses? In most situations like what you appear to be describing, the ip helper address configuration will point towards a DHCP server so that it will distribute addresses instead of the switch. In that case, there is no need to configure DHCP Relay on the firewall itself as it's already being handled by your switch and your DHCP server.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
