DHCP server runs out of ip pool interface Error

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

DHCP server runs out of ip pool interface Error

L3 Networker

We are using a PA-200 for our test network and have DHCP configured on the FW.  We have test devices that generate a new MAC address everytime it reboots.. so our scope is out of address.  Is there a way to clear all current IP's and start fresh?

1 accepted solution

Accepted Solutions

L5 Sessionator

Can you try with the below command, if the PANFW is the DHCP server?

>clear dhcp lease all

BR,

Karthik RP

View solution in original post

2 REPLIES 2

L5 Sessionator

Can you try with the below command, if the PANFW is the DHCP server?

>clear dhcp lease all

BR,

Karthik RP

L5 Sessionator

Adding to the above comment if you want to clear it for particular interface etc you can use the following command

admin@500> clear dhcp lease interface ethternet1/2

> expired-only   clear expired leases

> ip             clear lease for IP address

> mac            clear lease for mac address (format xx:xx:xx:xx:xx:xx)

  <Enter>        Finish input

Hope this helps.

Thanks

  • 1 accepted solution
  • 3309 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!