07-25-2013 02:59 AM
Hi,
Panos ver 4.1.13 Dhcp server on layer3 interface suddenly stops.Restarting device fixes that.
error comes as Failure: dhcp server is not enabled on interface 'ethernet1/3'.
Anyone see that error ? Any idea ?
07-25-2013 03:17 AM
I found the following in the release notes of PANOS 5.0.2.
Seems like you might be running in to the same issue.
The firewall was intermittently failing to respond to DHCP requests from hosts after upgrading to PAN-OS 5.0. Issue due to a problem that occurred after lease information was saved on the firewall every 12 hours after a restart, the issue was cleared, but would then occur again after 12 hours.
07-25-2013 03:17 AM
I found the following in the release notes of PANOS 5.0.2.
Seems like you might be running in to the same issue.
The firewall was intermittently failing to respond to DHCP requests from hosts after upgrading to PAN-OS 5.0. Issue due to a problem that occurred after lease information was saved on the firewall every 12 hours after a restart, the issue was cleared, but would then occur again after 12 hours.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
