dhcp server stops

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

dhcp server stops

L6 Presenter

Hi,

Panos ver 4.1.13 Dhcp server on layer3 interface suddenly stops.Restarting device fixes that.

error comes as Failure: dhcp server is not enabled on interface 'ethernet1/3'.

Anyone see that error ? Any idea ?

1 accepted solution

Accepted Solutions

L3 Networker

I found the following in the release notes of PANOS 5.0.2.

Seems like you might be running in to the same issue.

The firewall was intermittently failing to respond to DHCP requests from hosts after upgrading to PAN-OS 5.0. Issue due to a problem that occurred after lease information was saved on the firewall every 12 hours after a restart, the issue was cleared, but would then occur again after 12 hours.

View solution in original post

1 REPLY 1

L3 Networker

I found the following in the release notes of PANOS 5.0.2.

Seems like you might be running in to the same issue.

The firewall was intermittently failing to respond to DHCP requests from hosts after upgrading to PAN-OS 5.0. Issue due to a problem that occurred after lease information was saved on the firewall every 12 hours after a restart, the issue was cleared, but would then occur again after 12 hours.

  • 1 accepted solution
  • 1971 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!