02-17-2018 03:15 PM
Question is it possible to create and use a dns proxy when in vwire mode. I would think that a vlan with an ip would need to be created in Interfaces- Vlan to facilitate this. Thought I would query to see if anyone had tried this. One issue that comes to mind is vwire layer 2, vlan with ip layer three probably will not work but I'm curiuos.
Thanks
Andy
02-19-2018 04:08 AM
Hi @AndyYerger
vwire is a bump in the wire, unlike layer2 you can't add a vlan with a numbered interface 'inside' the vwire
you can attach an additional dataplane interface to your local network and set it on a VR with the same default gateway as your clients (so it is able to route it's connections out through the vwire) and set a dns proxy service on it
02-19-2018 04:08 AM
Hi @AndyYerger
vwire is a bump in the wire, unlike layer2 you can't add a vlan with a numbered interface 'inside' the vwire
you can attach an additional dataplane interface to your local network and set it on a VR with the same default gateway as your clients (so it is able to route it's connections out through the vwire) and set a dns proxy service on it
02-19-2018 10:25 AM
Thank you will give it a try
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
