Does PA-500 supports interface grouping ?

cancel
Showing results for 
Search instead for 
Did you mean: 

Does PA-500 supports interface grouping ?

L3 Networker

Dears,

can i assign one IP to several interfaces ( called bgroup in juniper ) or switching interface ?

my scenario is i need to connect 2 server direclty to two port on PA-500 as DMZ and these interfaces will have single IP will be the gateway for both.. couldnt find the option under interfaces....

1 ACCEPTED SOLUTION

Accepted Solutions

L4 Transporter

I think you'll have to assign the PA-500 interface in L2 mode, and then assign the IP address on the workstation/server.

You'll get a commit error if you assign two IP addresses in L3 mode since they will overlap.

View solution in original post

3 REPLIES 3

L4 Transporter

I think you'll have to assign the PA-500 interface in L2 mode, and then assign the IP address on the workstation/server.

You'll get a commit error if you assign two IP addresses in L3 mode since they will overlap.

View solution in original post

L4 Transporter

Yep, just configure the interfaces as L2 and then create a new VLAN interface in the same VLAN as the L2 interfaces.  That VLAN interface is where you will configure the IP address.

Cheers,

Kelly

L4 Transporter

Yes it does. See doc https://live.paloaltonetworks.com/docs/DOC-1618 for config details

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!