01-10-2019 09:09 AM - edited 01-10-2019 09:21 AM
I need to setup VPN tunnel with Cisco ASA
Does PA support Phase 1 - AES-256-SHA?
Phase 2
AES-SHA-HMAC-256?
I can only see AES-256-Scdc encryption?
01-12-2019 12:05 PM
Hi @MP18
Are you sure on cisco side it is called "AES-SHA-HMAC-256"? Because from cisco naming I know this is not called like this.
Anyway Paloalto supports the requirements you have (AES256-cbc, SHA1, SHA256) as on Cisco side when there is only AES256 it means AES256-cbc.
(The encryption is done with AES256 algorithm - SHA1/SHA256 are algorithms for dataintegrity)
Regards,
Remo
01-12-2019 12:05 PM
Hi @MP18
Are you sure on cisco side it is called "AES-SHA-HMAC-256"? Because from cisco naming I know this is not called like this.
Anyway Paloalto supports the requirements you have (AES256-cbc, SHA1, SHA256) as on Cisco side when there is only AES256 it means AES256-cbc.
(The encryption is done with AES256 algorithm - SHA1/SHA256 are algorithms for dataintegrity)
Regards,
Remo
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
