does PA support encryption AES-256-SHA and AES-SHA-HMAC-256?

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

does PA support encryption AES-256-SHA and AES-SHA-HMAC-256?

Cyber Elite
Cyber Elite

 

I need to setup VPN tunnel with Cisco ASA

Does PA support  Phase 1 - AES-256-SHA?

 

Phase 2 

 

AES-SHA-HMAC-256?

 

I can only see AES-256-Scdc encryption?

MP

Help the community: Like helpful comments and mark solutions.
1 accepted solution

Accepted Solutions

L7 Applicator

Hi @MP18

 

Are you sure on cisco side it is called "AES-SHA-HMAC-256"? Because from cisco naming I know this is not called like this.

Anyway Paloalto supports the requirements you have (AES256-cbc, SHA1, SHA256) as on Cisco side when there is only AES256 it means AES256-cbc. 

(The encryption is done with AES256 algorithm - SHA1/SHA256 are algorithms for dataintegrity)

 

Regards,

Remo

View solution in original post

1 REPLY 1

L7 Applicator

Hi @MP18

 

Are you sure on cisco side it is called "AES-SHA-HMAC-256"? Because from cisco naming I know this is not called like this.

Anyway Paloalto supports the requirements you have (AES256-cbc, SHA1, SHA256) as on Cisco side when there is only AES256 it means AES256-cbc. 

(The encryption is done with AES256 algorithm - SHA1/SHA256 are algorithms for dataintegrity)

 

Regards,

Remo

  • 1 accepted solution
  • 3805 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!