03-19-2021 06:54 PM
I'm PA student, and learning DoS protection. I have a question, In Object > DoS Protection > Add profile > Resources Protection, Maximum Concurrent default value is 32768, but I can not press OK and prompt the value is 0 ~ 0x4e2, it is decimal 1250.
Why in doc or training video, those can input 32768?
And after finish DoS Protection setting, how am I to verify? show dos-protection rule [rule-name] statistics?
My PA is VM that version 8.0.0 and working on GNS3.
Infinite thanks,
Chin
03-23-2021 10:22 AM
Hello
Is the 8.0.0 FW registered and licensed on the PANW website?
If you are only looking at the GUI and not sending lab traffic in GNS3, it could be that the FW is not licensed, and therefore, will not allow configurations on an otherwise unlicensed FW. Outside of that, 8.0.0 is 3 years (more or less) and you may want to try a 9.x version (if you can find it)
Good luck.
03-23-2021 10:22 AM
Hello
Is the 8.0.0 FW registered and licensed on the PANW website?
If you are only looking at the GUI and not sending lab traffic in GNS3, it could be that the FW is not licensed, and therefore, will not allow configurations on an otherwise unlicensed FW. Outside of that, 8.0.0 is 3 years (more or less) and you may want to try a 9.x version (if you can find it)
Good luck.
03-23-2021 02:18 PM - edited 03-26-2021 12:18 AM
Thanks your help.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
