DPD check

[licenselu]

Hello,

Is there any CLI commands to check if Dead Peer Detection (DPD) is receiving/sending keepalive packets to the remote VPN peer ??

Regards,

HA

[HULK · Accepted solution]

Hello Sir,

Periodically it will send "R_U_There" packets to the peer which will respond back with an acknowledgement. The PAN doesn't currently have a log/CLI command associated with DPD packets, but they can be detected in a debug packet capture.

Reference doc : Dead Peer Detection and Tunnel Monitoring

Thanks

[licenselu]

Hello

Thanks for your help.

It would be nice to see, from the CLI, if the sending/receiving counters is incrementing for a specific tunnel.

I will probably an SR and request such feature.

Regards,

HA