DPD check

Reply
Highlighted
L4 Transporter

DPD check

Hello,

Is there any CLI commands to check if Dead Peer Detection (DPD) is receiving/sending keepalive packets to the remote VPN peer ??

Regards,

HA


Accepted Solutions
Highlighted
L7 Applicator

Re: DPD check

Hello Sir,

Periodically it will send "R_U_There" packets to the peer which will respond back with an acknowledgement. The PAN doesn't currently have a log/CLI command associated with DPD packets, but they can be detected in a debug packet capture.


Reference doc : Dead Peer Detection and Tunnel Monitoring


Thanks

View solution in original post


All Replies
Highlighted
L7 Applicator

Re: DPD check

Hello Sir,

Periodically it will send "R_U_There" packets to the peer which will respond back with an acknowledgement. The PAN doesn't currently have a log/CLI command associated with DPD packets, but they can be detected in a debug packet capture.


Reference doc : Dead Peer Detection and Tunnel Monitoring


Thanks

View solution in original post

Highlighted
L4 Transporter

Re: DPD check

Hello

Thanks for your help.

It would be nice to see, from the CLI, if the sending/receiving counters is incrementing for a specific tunnel.

I will probably an SR and request such feature.

Regards,

HA

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!