Dual ISP and PBF

Reply
Highlighted
L1 Bithead

Dual ISP and PBF

Hi,

 

currently we have one ISP and our interVLAN routing between internal networks is done by the core switch. In the future we plan on obtaining a second WAN connection which is to be used exclusively for voice traffic. Every other type of traffic should use the other WAN connection.

 

Topology.JPG

 

Can this be achieved with PBF? If so, what is best practice for the implementation, a VR for each ISP?

 

Thanks,

Lostdragon

Tags (3)

Accepted Solutions
Cyber Elite

@lostdragon 

You only need one VR. And then depending on your setup you can use one or more simple static routes (in case your voice traffic needs to go to an external provider where you know the IP addresses) or a PBF rule where you specify the voice ports that need to be sent out of the second ISP connection.

View solution in original post


All Replies
Cyber Elite

@lostdragon 

You only need one VR. And then depending on your setup you can use one or more simple static routes (in case your voice traffic needs to go to an external provider where you know the IP addresses) or a PBF rule where you specify the voice ports that need to be sent out of the second ISP connection.

View solution in original post

Highlighted
Cyber Elite

@lostdragon,

To add on to the answer that @vsys_remo  already gave; if your network map is an accurate depection of your network design, this will actually be a really straight-forward afair. You already have your Voice network segmented out from your regular users, so simply specifying a new route for your phones will likely be the answer here. 

If you need any additional help when you actually get the new connection just make a new post or update this one, but keep things simple. As @vsys_remo already mentioned you don't need a new VR in this situation and simply updating the routes is going to be a simpler change than setting up PBF for something that doesn't require it. 

Highlighted
L1 Bithead

Thank you @vsys_remo and @BPry . The solution you suggested sounds a lot easier than I thougt.

Will try specifying static routes for the phones and update this post if I run into problems.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!