Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
12-14-2019 09:04 PM
Hi,
Firewall
DUAL ISP
ISP1 ETH1/1 IPSEC TUNNEL 1
ISP1 ETH1/2 IPSEC TUNNEL 2
ECMP Method HASH
I have ECMP enabled with DUAL ISP with two IPSEC tunnels going to another firewall with one ISP. What I am seeing is sometimes is IPSEC tunnel from Eth1/1 to the other firewall going over Eth1/2. How do I prevent this?
Thanks
12-16-2019 09:38 AM
ECMP = Equal Cost... with Dual ISP.
By your design, you are agreeing/wanting for the FW to load-share between Eth1 and Eth2.
If you do not want this, then turn on the ECMP function, and only let the traffic go out via eth1.
If the VPN fails, then there should be a Monitor Profile, that the VPN can use, to initiate a backup tunnel on eth2.
02-17-2021 08:07 PM
You would have to enable the strict source path. This feature was introduced in PanOS 10.0 - https://docs.paloaltonetworks.com/pan-os/10-0/pan-os-new-features/networking-features/ecmp-strict-so...
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
