Is it possible to create an object in panorama that can be reused in multiple templates that is literally just tied to the ip of an interface on that device?
For example, eth1/1 has address 126.96.36.199
Object should just reference eth1/1
Object can be used in template that can be reused for multiple devices.
Solved! Go to Solution.
I thought this was solved but after further testing, I'm not sure that it is solving the problem I'm running into specifically.
While being able to put an IP of say 188.8.131.52/29 in object 'external_interface'. If i use the object 'external_interface' in a security policy rule, it hits on the whole subnet instead of the specific address i picked within the subnet. Does this make sense?
Object is 184.108.40.206/29
Rules will hit 220.127.116.11 - 18.104.22.168
I only want rules to hit on 22.214.171.124
I need 126.96.36.199/29 for interface
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!