06-13-2022 02:11 PM
I am using PA 3020 firewall and will need to monitor traffic east to west and configured internally.
Any one will provide me process how to configured that will be great help.
06-13-2022 05:48 PM
How is the firewall currently deployed? How many interfaces? Zones?
Which ones are east west, what about north south?
In general the configuration portion is meant to be smooth. After the device is registered and you have licenses installed, you would go to the network tab, zones, and add your names of east/west zones (DMZ, Core, Guest, etc)
You would attach those zones to interfaces (e.g. eth1/1 is WAN, eth 2/1 is LAN, eth 1/2 is DMZ, etc)
You then write policies allowing traffic to flow between zones in the policies tab (e.g. from zone LAN to zone Core allow smb)
06-13-2022 05:48 PM
How is the firewall currently deployed? How many interfaces? Zones?
Which ones are east west, what about north south?
In general the configuration portion is meant to be smooth. After the device is registered and you have licenses installed, you would go to the network tab, zones, and add your names of east/west zones (DMZ, Core, Guest, etc)
You would attach those zones to interfaces (e.g. eth1/1 is WAN, eth 2/1 is LAN, eth 1/2 is DMZ, etc)
You then write policies allowing traffic to flow between zones in the policies tab (e.g. from zone LAN to zone Core allow smb)
06-16-2022 10:21 AM
Thanks for the update.
Appreciated !
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
