EDL and Auto Commit Fail

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

EDL and Auto Commit Fail

L4 Transporter

So the EDL ballooned at some point and was not checked beyond capacity of 220 PAs.

Upgrade attempted from 9.1 to 10.1

When upgraded to 10.0 autocomit won't complete and give large EDL error.

 

Firewall doesn't seem to make connection attempts to EDL hosting server, where IP's have been reduced to less than 10 to fix this.

Auto commit won't finish until this issue is resolved.

 

How can we flush the EDL and exit the loop.

1 accepted solution

Accepted Solutions

L4 Transporter

This was resolved after forcing upgrade to 10.1 even though on intermediate 10.0 it would not auto commit because of EDL size.

View solution in original post

1 REPLY 1

L4 Transporter

This was resolved after forcing upgrade to 10.1 even though on intermediate 10.0 it would not auto commit because of EDL size.

  • 1 accepted solution
  • 1683 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!