Error in EBL Refresh job

[CliffSilva]

Hi guys!

I have two PA-5060 in HA and in this moment my secondary is active. In secondary I've seen the following messages:

EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
EBL(dyn-block-list-ip-sadc) Unable to fetch external list.  Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
EBL(dyn-block-list-ip-sadc) Unable to fetch external list.  Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) Unable to fetch external list.  Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) Unable to fetch external list.  Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
EBL(dyn-block-list-ip-sadc) Unable to fetch external list.  Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list

When I check if the access test to URL is ok I got this:

> request system external-list url-test http://10.29.xxx.2xx/sadc-fwng-ip-list-bloq.txt
URL is accessible

My list have this format:

69.10.56.10/32
195.228.152.23/32
208.73.211.165/32

Only secondary device is showing this messages. Someone had this messages any time?

[CliffSilva · Accepted solution]

Hey guys!

I solved the problem.

https://live.paloaltonetworks.com/t5/Configuration-Articles/Setting-a-Service-Route-for-Services-to-...

Was needed include the destination route for the especific host where the list is hosted.