- Access exclusive content
- Connect with peers
- Share your expertise
- Find support resources
09-05-2017 08:46 AM
Hi guys!
I have two PA-5060 in HA and in this moment my secondary is active. In secondary I've seen the following messages:
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
EBL(dyn-block-list-ip-sadc) Unable to fetch external list. Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
EBL(dyn-block-list-ip-sadc) Unable to fetch external list. Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) Unable to fetch external list. Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) Unable to fetch external list. Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
EBL(dyn-block-list-ip-sadc) Unable to fetch external list. Using old copy for refresh.
EBL(dyn-block-list-ip-sadc) EBLRefresh job failed. No valid IPs found in list
When I check if the access test to URL is ok I got this:
> request system external-list url-test http://10.29.xxx.2xx/sadc-fwng-ip-list-bloq.txt
URL is accessible
My list have this format:
69.10.56.10/32
195.228.152.23/32
208.73.211.165/32
Only secondary device is showing this messages. Someone had this messages any time?
09-05-2017 10:40 AM
Hey guys!
I solved the problem.
Was needed include the destination route for the especific host where the list is hosted.
09-05-2017 10:40 AM
Hey guys!
I solved the problem.
Was needed include the destination route for the especific host where the list is hosted.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!