EVE-NG PA booting issue

Reply
Highlighted
L1 Bithead

EVE-NG PA booting issue

Hi all,

 

I have a eve-ng laptop that i'm planning to use for practice. I have installed the KVM file and activated it as well as added it to the eve-ng lab. However, when i start the device. I get the error message "No bootable Device". This device is currently configured to use PA8.0.5 in the EVE-NG environment. 

 

I have Attached a screenshot of the boot messages to this post. Please, help me take a look at it and advice what to do. I'm just learning to setup my own EVE-NG lab to start practicing on my own. So, any help will be much appreciated. Also, you can see the booting messages below.

 

###########################################

.......... No configuration methods s
ucceeded (http://ipxe.org/040ee119)
No more network devices

Booting from ROM...
iPXE (PCI 00:04.0) starting execution...ok
iPXE initialising devices...ok

 

iPXE 1.0.0+ (0600d) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT

net1: 50:00:00:01:00:01 using 82540em on 0000:00:04.0 (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net1 50:00:00:01:00:01)................. No configuration methods s
ucceeded (http://ipxe.org/040ee119)
No more network devices

Booting from ROM...
iPXE (PCI 00:05.0) starting execution...ok
iPXE initialising devices...ok

 

iPXE 1.0.0+ (0600d) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT

net2: 50:00:00:01:00:02 using 82540em on 0000:00:05.0 (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net2 50:00:00:01:00:02)................. No configuration methods s
ucceeded (http://ipxe.org/040ee119)
No more network devices

Booting from ROM...
iPXE (PCI 00:06.0) starting execution...ok
iPXE initialising devices...ok

 

iPXE 1.0.0+ (0600d) -- Open Source Network Boot Firmware -- http://ipxe.org
Features: DNS HTTP iSCSI TFTP AoE ELF MBOOT PXE bzImage Menu PXEXT

net3: 50:00:00:01:00:03 using 82540em on 0000:00:06.0 (open)
[Link:up, TX:0 TXE:0 RX:0 RXE:0]
Configuring (net3 50:00:00:01:00:03)................. No configuration methods s
ucceeded (http://ipxe.org/040ee119)
No more network devices

No bootable device.

Highlighted
Cyber Elite

Howdy

 

Support for this may not be within the Live Community.  This challenge is a generic KVM issue, not specific to PANW.

I am running KVM as well, with zero issues, so it is all about how you set up the guest OS.

 

Did you get the HDD to be a virt-io?

Continue to search for other KVM related support sites to assist, would be a suggestion.

 

 

Help the community: Like helpful comments and mark solutions
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!