explanation of a paloalto log

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

explanation of a paloalto log

L1 Bithead

 

2017/06/07 10:40:02,TRAFFIC,end,10.100.28.51,183.61.xxx.xxx,Inside-to-Outside,15523xxx,,non-syn-tcp,80,tcp,allow,384,384,0,7,2017/06/07 10:36:53,any,6469463962,0x0,10.0.0.0-10.255.255.255,0,0,from-policy
1 "ReceiveTime" = 2017/06/07 10:40:02,
2 "Type" = TRAFFIC
3 "ThreatContentType" = end
4 "SourceAddress" = 10.100.28.51
5 "DestinationAddress" = 183.61.xxx.xxx
6 "Rule" = Inside-to-Outside
7 "SourceUser" = 15523xxx
8 "DestinationUser" = -
9 "Application" = non-syn-tcp
10 "DestinationPort" = 80
11 "IPProtocol" = tcp
12 "Action" = allow
13 "URL" = 384
14 "ThreatContentName" = 384
15 "Category" = 0
16 "Reportid" = 7
17 "Severity" = 2017/06/07 10:36:53
18 "Seqno" =any
19"SourceCountry" 6469463962
20"DestinationCountry" =0x0
21"Content" = 10.0.0.0-10.255.255.255
22"ContentType" = 0
23"Filetype" =0
24"Recipient" = from-police

 

i have a log paloalto, but I do not understand some of the intent of the contents of the log. can i explain what is the purpose of url = 384 , ThreatContentName = 384, Category=0,Reportid=7, Severity = 2017/06/07 10:36:53, Recipient = from police.

is there a paper, documentation or something that discusses it?

1 REPLY 1

Cyber Elite
Cyber Elite

Is it possible a collumn was shifted and this is actually the byte count? what is shown in the GUI if you open the detailed view of this log?

Normally 'from-policy' should be located in the collumn 'action_source' (meaning 'who decided what to do with this session'), so I believe your log collumns are incorrect

 

secondly: The log is regarding a non-syn-tcp packet. This type of packet is normally discarded as it is not part of a normal session and can be malicious. In this case it is being allowed through so it appears you have a manual override in place to temporarily allow these packets.

 

I'd recommend re-enabling the tcp check to drop these types of packets

Tom Piens
PANgurus - Strata specialist; config reviews, policy optimization
  • 1584 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!