07-20-2017 10:29 AM
There should be no partial failover.
Either active/passive or active/active.
Do you see failover event in System log?
07-20-2017 11:02 AM
I didn't think it was possible either but someone asked and I wanted more than just my answer I am about to check the system logs 🙂
07-20-2017 11:10 AM
what is the event to look for in the system logs for a fail over is it failover?
07-20-2017 11:29 AM
( subtype eq ha)
07-20-2017 11:39 AM
I thought you were lauging at me LOL it seems to have lost it heartbeat connection but could that break anything once that condition is cleared?
07-20-2017 11:49 AM
If firewalls don't see each other over HA1 then both are active and accept sessions.
Shut down one firewall if you can't fix HA1 to get things up and running.
You have split brain situation.
07-20-2017 12:06 PM
Its no longer in split brain that I can see , but we could restart the passive firewall right now and see what happens. It is trying to send traffice to a router IP that no longer exists
07-20-2017 12:16 PM
Are you sure that your passive firewall is actually passive and not processing traffic. Just because this unit reports that it's staying in active after the split-brain event doesn't mean necessary that the peer firewall didn't come to the same conclusion. During the 428s where you were in a split-brain event however you would definately have both firewalls processing traffic.
07-20-2017 12:26 PM
I am going to go check the traffic on the passive palo and see
07-20-2017 12:28 PM
But what would it route to an IP address that no longer is on the PA?
07-20-2017 12:34 PM
Are the sessions routing to the non-existing IP possibly be tied to existing sessions? Depending on your policy setup it would continue to take that path, or attempt to. If this is tied to specific sources or destinations you could try clearing the session list with a filter for that criteria and see if that clears things up.
07-20-2017 12:39 PM
could there still be a session related to an IP that was removed several months ago from the PA? It also looks like the synch is still in progress between the two PA's and it seems like it is lasting too long
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
