Firewall bidirectional nat

cancel
Showing results for 
Search instead for 
Did you mean: 

Firewall bidirectional nat

L0 Member

I configured the bidirectional nat. After the configuration is complete, it can be accessed from the outside, but it cannot be accessed from the internal network. The link I visited is https://anyshare.positecgroup.com/#/
The public address is 218.4.72.251.
I put my configuration in the attachment, can you help me see where there is a problem?
image001(12-11-16-50-48).pngimage002(12-11-16-50-48).png

2 REPLIES 2

L7 Applicator

You need U-Turn NAT

Check out this article https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cln3CAC

Tom Piens
PANgurus

Hello,

As reaper mentioned you need a u-turn nat. Or you can change your internal DNS record for that to point to the internal IP for the internal users.

Options

Regards,

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!