I have question for access routes. We have configured global protect and advertised only one access route however after connecting to global protect VPN, we can see multiple access routes in client machine. Is there any other criteria for access routes to be advertised?
Hi @gpandya ,
Specifying host/network under GP gateway --> Agent --> Split Tunnel --> Access route is the only configuration that is used to route traffic through Global Protect and for these host/networks, routes gets added on client system post connecting GP. No other criteria/configuration is required.
Kindly check this configuration again. And also try to connect GP VPN on other client system and check if you see same observations.
Thanks Mayur & Mandar
We have set route in "Access route" TAB only.
Let say for example, we have defined 192.168.0.0/16 subnet in access route but we are getting multiple subnets in client machine like 192.168.1.0/23 and so on. There is no problem with connectivity of routes. Just we are getting multiple subnets on client machines when we do "Route Print"
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!