I have 15 proxy-ids in the vpn tunnel whose peer is checkpoint firewall. Just one out of 15 usually remains really busy and lot of traffic get encap/decap on it. Remote users accessing resources within other 14 proxy-ids have absolutely no issues but they occasionally loose connectivity to those that are in the busiest proxy id and it recovers back automatically after 45-60mins.
My VPN settings are as below:
Phase 2: No PFS, No lifesize , Lifetime:1hr
Phase 1: Group 5, Lefiteime:24hrs
I started to assume it's because the bytes inside the proxy id is reaching the max limit and fails until a phase 2 rekey(1hr) happens. can someone let me know if I'm right in my assumption?
if it's so, I can think of 2 solutions:
1.enforce lisize settings to say 1000MB so tunnel rekeys automatically.
2. bifurcate the local network (/24) in the proxy id into smaller chunks( two /25s) .
Thanks in advance.
Before making any other changes, i would recommend you to cross verify encryption domains at both ends and check if it matches. Make sure strictly same encryption domains are configured at both ends. Checkpoint is very naughty device in such cases.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!