Global Protect IP assignments

Reply
gzygadlo
L1 Bithead

Global Protect IP assignments

Its seems with the 4.1.4 client then when a user connects and gets an IP address that the client remembers the IP.  I have an issue where that has happened, but the user got it out of the wrong pool and I can't seem to find a way to get it released.

 

Also can you use a DHCP server with Global Protect and have different IP blocks based on the configuration?

Tags (3)
reaper
L7 Applicator

GlobalProtect has its own pool of IPs so you can't combine it with a DHCP server but you can have multiple subnets/ranges

 

just make sure you do not combine 'agent' settings with 'client' settings:

If you configure IP pools at the gateway level (Network > GlobalProtect > Gateways > <gateway-config> > GlobalProtect Gateway Configuration > Agent > Client IP Pool), do not configure any IP pools at the client level (Network > GlobalProtect > Gateways > <gateway-config> > GlobalProtect Gateway Configuration > Agent > Client Settings > <client-setting> > Configs > IP Pools).
Tom Piens - PANgurus.com
Like my answer? check out my book! amazon.com/dp/1789956374
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!