Global Protect - Split Tunnel

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

Global Protect - Split Tunnel

L3 Networker

Is it possible with global protect and split tunnel setup to have policies applied for url filtering to the local client so that sites can be blocked in split tunnel mode?

9 REPLIES 9

L5 Sessionator

Hi markk96

You just need to apply URL filtering to the policy with from-zone as the zone to which the required tunnel interface (SPLIT/FULL) is bound.

Let me know if you have any queries.

Thanks

I am not sure, I have a policy setup from my GP_Zone with any and any to L3-Inside and L3-Outside with the URL policy applied.  If I do not use split tunnel it work, if I remove 0.0.0.0/0 from the client portal config it split tunnels and the policy is not picked up. 

markk96

I could not get you, when you remove the 0.0.0.0/0 is the client still able to access the Internet through GP (and PAN firewall) after you remove it ?

Thanks

No those did not answer my question, I have already read them.  I still cannot get url filtering to apply to a non split tunnel rule

If I remove 0.0.0.0/0 and disconnect and reconnect the global connect client the pc goes out its local internet and not the company internet, but it can reach internal resources just fine.  I am required to use split tunnel but still apply url-filtering. Not even sure that is possible.

markk96

Do you want to apply url-filering for the internal resources you are accessing through GP? Because we can only use URL filtering if the traffic is going through GP i.e. PAN FW.

No i was hoping the client could use the local internet but still have url policy applied from the pan fw to still control websites.

markk96

Unfortunately, it is not possible, for the URL filtering policy to be applied the traffic should go through the PAN FW.

  • 3643 Views
  • 9 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!