06-03-2013 11:30 AM
Is it possible to have more than 1 Global Protect portal and gateway on a single appliance? We use tunnel all mode with a route of 0.0.0.0/0 for all of our users. However today a vendors need access but want to use their own systems at the same time. In this case I would not want to tunnel everything, only our private subnet.
06-03-2013 11:43 AM
Yes it is possible to use 2 portal each have a gateway without a GP license.
But you need a license if a portal will have more than one gateway.
06-03-2013 11:43 AM
Yes it is possible to use 2 portal each have a gateway without a GP license.
But you need a license if a portal will have more than one gateway.
06-03-2013 01:31 PM
I just need 2 single portals each with a gateway so this should work.
06-04-2013 01:37 AM
Hi,
Just keep in mind that two portal mean 2 public IPs, cant split portal like https:www.mycompany/portal1 and https:www.mycompany/portal2
V.
12-04-2017 11:11 AM
Hi,
I am trying to configure something similar. One portal for a specific group of users and second portal for another group of users. The first group will use certs and the second group only AD credentials. This means I can configure two portal but each of them require an individual IP, right?
Do I require the use of loopback interfaces or I just need to configure one tunnel interface per portal with a dedicated public IP?
What happens if the Palo is installed in Azure and it gets a dynamic IP on the UNTRUST interface? Is there a way to acommplish it?
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
