GlobalProtect and Cisco IPCommunicator

Showing results for 
Show  only  | Search instead for 
Did you mean: 

GlobalProtect and Cisco IPCommunicator

L1 Bithead

Recently rolled out GP to our users. We have some that have issues using IPCommunicator while using GP. Anybody know of anything to help these users? They are able to ping TFTP servers.

Users are in UK - CallManager Cluster is in US (Wisconsin)


L4 Transporter


Have we narrowed down the relevant traffic logs to see what the firewall is doing with that traffic?

If so, please provide us with this information.


Please do not forget to mark and 'Helpful' or 'Correct' replies.

L7 Applicator

Multiple vpn clients frequently will not work at the same time as they are both trying to create software network interfaces and control local routing.

Specifically both of the clients would need to be configured for split tunnel or they really cannot work together most of the time.  when your client is non-split tunnel it forces every stream from the workstation into that tunnel.  This creates a conflict between the two that is nearly impossible to resolve.

If one is non-split tunnel that should be initiated first, then the split tunnel and they might play nice together.

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

L3 Networker

Hi Rich,

Make sure the IP Communicator's IP (Either static or via dhcp) is not overlapping with the IP pool configured on the GP gateway?

If the IP's assigned to your GP virtual adapter and your softphone are on the same subnet you might have issues.

Also, make sure that any ip/network the IP communicator needs to reach (tfpt, call manager, other softphones etc) are not overlapping with IP pool from GP gateway.

Could you provide more information on what the client is experiencing? Ex: Failing to register; calls dropping , intermittent issues , etc.

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!