11-15-2019 01:09 PM
I have a pair of 3220s I'm configuring in HA active/passive. We connected the HSCI ports and got a green light on the ports and showing green/up on the HA dashboard widget. They are direct-connected and configured as Ethernet. Do I need to set an IP address on these for this config or are they good to go?
11-15-2019 02:08 PM
Hello,
Depends if its HA1 or HA2. HA1 Yes HA2 no.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PMtaCAG
Check this out.
Regards,
11-15-2019 02:08 PM
Hello,
Depends if its HA1 or HA2. HA1 Yes HA2 no.
https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000PMtaCAG
Check this out.
Regards,
11-15-2019 02:28 PM
Perfect, thank you. Answer is at 7:30 in the vid.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
