HA2 Backup Port Link Speed

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

HA2 Backup Port Link Speed

L3 Networker

Does the HA2 backup port need to be the same link speed as the primary HA2 port?

 

Customer is wondering if it is possible to use a 10G SFP+ port to backup the 40G HSCI port.

 

I cannot find anything in the documentation discussing this and don't currently have access to the hardware to test.

 

Thanks.

1 accepted solution

Accepted Solutions

Cyber Elite
Cyber Elite

@TSilverline,

No. You can use the hsci port as the primary and then use one of the SFP+ ports as a backup without issue. You would only run into an issue if your HA2 traffic saturates that 10G link. 

View solution in original post

1 REPLY 1

Cyber Elite
Cyber Elite

@TSilverline,

No. You can use the hsci port as the primary and then use one of the SFP+ ports as a backup without issue. You would only run into an issue if your HA2 traffic saturates that 10G link. 

  • 1 accepted solution
  • 3483 Views
  • 1 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!