06-05-2018 03:08 PM
Does the HA2 backup port need to be the same link speed as the primary HA2 port?
Customer is wondering if it is possible to use a 10G SFP+ port to backup the 40G HSCI port.
I cannot find anything in the documentation discussing this and don't currently have access to the hardware to test.
Thanks.
06-05-2018 08:06 PM
No. You can use the hsci port as the primary and then use one of the SFP+ ports as a backup without issue. You would only run into an issue if your HA2 traffic saturates that 10G link.
06-05-2018 08:06 PM
No. You can use the hsci port as the primary and then use one of the SFP+ ports as a backup without issue. You would only run into an issue if your HA2 traffic saturates that 10G link.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
