10-30-2015 07:22 AM
Hi,
I have PA-2020 which has high dataplane cpu utilization. It is stuck at 100% during business hours. It drops to 25% after work. I suspect too much traffic but is there an easy way to check what sessions/applications are the most cpu intensive? Maybe from CLI?
Radoslaw
10-30-2015 03:41 PM
Hello,
Try the command, show running resource-monitor. That may get you what you are looking for.
I know the 2020's didnt have a seperate management plane so if you are running a service such as netflow, it may cause it to be super high.
Hope this helps..
10-30-2015 03:45 PM
Here are a few more articles I found:
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
