Since 2 weeks ago we have detected that the temperature for Sensor DP0 Core is high than other members the Paloalto FW
It is normal?
show system environmentals
Slot Description Alarm Degrees C Min C Max C
S0 Temperature: Broadwell MP Core False 38.40 -5.00 85.00
S1 NP False 36.50 -5.00 70.00
S1 CP False 33.50 -5.00 85.00
S1 DP0/CE False 40.50 -5.00 75.00
S1 DP0 Core False 65.00 -5.00 85.00
S1 Top Front False 28.50 -5.00 70.00
S1 Switch False 26.50 -5.00 70.00
S1 CP Core False 46.00 -5.00 85.00
S1 Switch Core False 43.00 -5.00 85.00
S1 NP Core False 30.00 -5.00 70.00
S1 Bottom Front False 20.50 -5.00 70.00
S1 DP1/DP2 False 25.00 -5.00 70.00
S1 Bottom Rear False 27.50 -5.00 85.00
Slot Description Alarm Inserted
S1 Fan Tray #1 (left) False True
S1 Fan Tray #2 (right) False True
I had the same problem and it was solved by blowing the equipment with an air blower, due to the accumulation of dust the circuits were generating higher temperatures.
By doing this procedure, the temperature dropped 10 degrees from what was marked in the alert.
I hope this helps you.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!