I have to two virtual routers
VR_1 - e1/1 - is connected to wan 1, e1/3 - is connected to internal network, e1/4 is connected to a switch so, VR_1 has e1/1,1/3,1/4 and I want the primary ospf route to be from e1/4. what changes should I make to do set all routes pass through e1/4.
VR_2 - e1/2 - is connected to wan 2.
currently all interfaces are in ospf network.
To supplement what @ArminGradscevic stated:
Networking Tab -> Virtual Routers-> the virtual router you are using->OSPF->Area->Interface tab
Then select the interface you want to make a heavier weight and set the metric. I usually keep my default one as the default of 10. Then I use intervals of 5000 for metrics since that usually is enough to override what OSPF selects. The higher the number, the less desirable OSPF will make that route.
Hope that helps.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!