How to Configure IPSec Load Balancing Via Primary and Secondary ISP Connection

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements
Please sign in to see details of an important advisory in our Customer Advisories area.

How to Configure IPSec Load Balancing Via Primary and Secondary ISP Connection

L3 Networker

Dear Team,

 

I have a Dual ISP (Primary/Secondary).

I need to configured IPSec Tunnel via Load Balancing method. 

What the method that we can apply to achive this.

 

Regrads

 

Karthikeyan Balamurugan

3 REPLIES 3

Community Team Member

Hi @karthikeyanB ,

 

Can this article help you ?

OSPF over IPSec with load balancing via ECMP dual ISP

 

Cheers !

-Kiwi.

LIVEcommunity team member, CISSP
Cheers,
Kiwi
Please help out other users and “Accept as Solution” if a post helps solve your problem !

Read more about how and why to accept solutions.

L0 Member

We do this and wound up using 2 virtual routers with BGP to handle failover.  We aren't doing load balancing, just redundant failover, though.

You could replace OSPF with BGP in that article and do load balancing.  Might have to run on the same virtual router though.  I've read the dual virtual router with BGP article as well and yes, this is an primary/failover VPN solution.  Remember, you must enable ECMP and if using iBGP there are a few more hoops to jump through.

  • 5193 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!