09-04-2023 10:44 PM
09-05-2023 05:24 AM
Hello there
what do you mean exactly with "configure local servers" ?
are you trying to reach remote servers on the other side of the tunnel?
- in that case you need to add a route in your VirtualRouter, next hop the tunnel interface, for the destination subnet (and a return route on the other side
- you also need to create a security rule that allows your local zone, towards the tunnel interface zone (do not set the tunnel interface to the same zone as your local LAN)
do you need to make local servers accessible to the remote side?
- in that case you also need to add a route in your VirtualRouter, next hop the tunnel interface, for the remote subnet (and a return route on the other side
- you also need to create a security rule that allows the tunnel interface zone (representing the remote network) access to the correct servers and ports on your local network
if you need to 'configure' your local servers, make sure they have a default route towards your firewall
hope this helps
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
