Enhanced Security Measures in Place: To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.
09-02-2023 10:03 AM - last edited on 09-03-2023 11:52 PM by kiwi
We have created a NAT policy to access the Server in the DMZ zone, we can able to successfully connect to the server from public network. But, we cannot see the traffic logs for the same.
09-02-2023 10:27 AM - edited 09-05-2023 03:31 AM
Hi @ChandrashekharD ,
Do you have logging enabled in your security policy rule? If not, you will not see the logs.
If you have enabled Log at Session End (recommended), then maybe the session has not ended. Check Monitor > Session Browser to see your active sessions.
Thanks,
Tom
09-04-2023 10:39 PM
Yes logging is enabled, while accessing server in DMZ through public IP it is successful but traffic is not showing
09-05-2023 04:55 AM
As per @TomYoung , how is the logging configured exactly (at session start or end ?) and are you able to identify the session in the session browser ?
Can you check the rule configuration and match it up with the session you actually see.
Please provide more information for us to help you.
Kind regards,
-Kim.
09-05-2023 05:21 AM
logging is configured for session end not for session start
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
