02-01-2018 09:13 PM - edited 02-01-2018 09:36 PM
I HAVE IPSEC TUNNEL BETWEEN MY PA AND another SIDE IS CISCO ASA, NOW ON BOTH SIDE THE IP IS SAME. SO HOW I WILL CONFIGURE NAT FOR THE SAME IP?
02-02-2018 12:37 AM
if there is IP overlap between 2 sites, both should apply NAT on the tunnel
check out this article: DotW: Help with IPSec Proxy IDs with overlapping IPs
02-02-2018 10:37 AM
My internal networks for PA : 10.177.0.0/16 and 10.177.11.0/24
Networks behind the peer cisco asa : 110.177.0.0/16 and 10.177.11.0/24 same.
Actully i am new in PA , so can anyone kindly send me the configuration or screen shot of configuration.
02-02-2018 10:39 AM
Thank you reaper 🙂
can you kindly send me the configuration or screen shot of configuration.
that will be very helpful for me, as i am new in PA.
Click Accept as Solution to acknowledge that the answer to your question has been provided.
The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!
These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!
The LIVEcommunity thanks you for your participation!
