How to determine memory in PA-500

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

How to determine memory in PA-500

L1 Bithead

We recently bought a PA500, and we've been annoyed at how slow it is to commit its config. We mentioned this to our SE the other day, and he explained that there was a memory upgrade available.

We're not sure if we have 1GB or 2GB of memory, and I'd like to find out - can anyone explain how to tell if we have the upgrade?

Thanks

3 REPLIES 3

L7 Applicator

Hello AMacaronis,

Please apply below mentioned  CLI command to identify the memory on your PAN-500 firewall.

Example: PA-500 with 2 GB RAM on the management-plane:

admin@PA-500> show system resources

Mem:   2028576k total  >>>>>>>>> It's a 2 GB Memory ,  1193104k used, 

Swap:  2008084k total,        0k used

Hope this helps.

Thanks

I ran the command... the relevant lines are

Mem:   1970840k total,  1920376k used,    50464k free,    68824k buffers

Swap:  2008084k total,   165980k used,  1842104k free,   340936k cached

So should I take that to mean we have a 2GB upgrade already?

You are absolutely correct. Smiley Happy

Thanks

  • 2986 Views
  • 3 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!