How to get PA-200 Split Tunneling Internet traffic only logs to forward to Panorama?
cancel
Showing results for 
Search instead for 
Did you mean: 

How to get PA-200 Split Tunneling Internet traffic only logs to forward to Panorama?

L1 Bithead

I have split tunneling setup on my PA-200.  I have the logs being forwarded to Panorama.  I would only like the logs from the Internet traffic to be forwarded to Panorama.

I don't want the VPN tunnel traffic logs to be sent to Panorama.

I have three security policies.

Default Outbound - Policy for split tunnel Internet traffic.

VPN Outbound - Outbound VPN traffic.

VPN Inbound - Inbound VPN traffic.

pa1.png

pa2.png

I thought if I set Log Forwarding to "none" for my "VPN Outbound" and "VPN Inbound" policies and set Log forwarding to "Panorama" for Default Outbound Policy, I would only see Internet traffic in my logs.

I am stilling see vpn traffic in my logs.  Is there something else I am missing?

2 REPLIES 2

L7 Applicator

The changes sound correct.  Have you  committed the changes on both Panorama and the device?

Steve Puluka BSEET - IP Architect - DQE Communications (Metro Ethernet/ISP)
ACE PanOS 6; ACE PanOS 7; ASE 3.0; PSE 7.0 Foundations & Associate in Platform; Cyber Security; Data Center

L4 Transporter

Mike

From the logs, check if the packets are matching the exact security rule. and verify this security rule has the correct log forwarding profile settings

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!