How to "Validate Candidate Config" on CLI?

Reply
Highlighted
L1 Bithead

How to "Validate Candidate Config" on CLI?

How to "Validate Candidate Config" on CLI?


Accepted Solutions
Highlighted
L4 Transporter

I guess you are looking at something similar to "commit check" Junos command.  There is no such command to validate the candidate configuration in PANOS. However, the system will validate the configuration when you commit, and if there are errors, the commit will fail and commands that caused the commit to fail will be displayed

Hope this helps

View solution in original post


All Replies
Highlighted
L3 Networker

Run command "show config candidate"

Regards,

Oliver

L1 Bithead

'show candidate config ' is only display candidate config.

I  hope check Candidate config before comiit.

Highlighted
L4 Transporter

I guess you are looking at something similar to "commit check" Junos command.  There is no such command to validate the candidate configuration in PANOS. However, the system will validate the configuration when you commit, and if there are errors, the commit will fail and commands that caused the commit to fail will be displayed

Hope this helps

View solution in original post

Highlighted
L4 Transporter

Forgot to mention- you can validate configuration from the web management screen. This is under device> configuration management

Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the Live Community as a whole!

The Live Community thanks you for your participation!