Enhanced Security Measures in Place:   To ensure a safer experience, we’ve implemented additional, temporary security measures for all users.

how to Revert configuration by cli - pa 200 v 9.0.14

cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Announcements

how to Revert configuration by cli - pa 200 v 9.0.14

L2 Linker

Hi Guys,

 

we have a problem on a HA pair, the secondary firewall is no longer accessible via either GUI or CLI.
We can only connect via console, to restore one of the saved and working configurations, is it necessary to do only these commands?

 

> configure

 

# load config

+ key          key

> from         Filename

> last-saved   Last saved configuration

> partial      partial config loading

> version      Version

 

# commit

 

i can't find the correct guide other than the one that refers only to the gui.

 

thanks for any tip

2 accepted solutions

Accepted Solutions

Cyber Elite
Cyber Elite

Hello,

Yes it is required. You have to enter configuration mode and then load the config version you would like to revert to. Once that is completed you would commit the changes.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm9uCAC

 

Regards,

View solution in original post

hi @OtakarKlier ,

 

i did the activity this morning and it worked.

 

tahnk you so much for the hepl!

View solution in original post

2 REPLIES 2

Cyber Elite
Cyber Elite

Hello,

Yes it is required. You have to enter configuration mode and then load the config version you would like to revert to. Once that is completed you would commit the changes.

https://knowledgebase.paloaltonetworks.com/KCSArticleDetail?id=kA10g000000Cm9uCAC

 

Regards,

hi @OtakarKlier ,

 

i did the activity this morning and it worked.

 

tahnk you so much for the hepl!

  • 2 accepted solutions
  • 4909 Views
  • 2 replies
  • 0 Likes
Like what you see?

Show your appreciation!

Click Like if a post is helpful to you or if you just want to show your support.

Click Accept as Solution to acknowledge that the answer to your question has been provided.

The button appears next to the replies on topics you’ve started. The member who gave the solution and all future visitors to this topic will appreciate it!

These simple actions take just seconds of your time, but go a long way in showing appreciation for community members and the LIVEcommunity as a whole!

The LIVEcommunity thanks you for your participation!